Noble shelters are 8′ high in the front and slope to 7’ high in the back. When properly erected and anchored with Noble anchors per their instruction sheet, the shelters and loafing sheds are engineered to withstand a 30 lb. per square foot snow load and a 90 mph wind.

Noble uses a heavy 15 Gauge Round Galvanized Steel Tube to manufacture their shelters. The shelter 1-7/8” diameter material they fabricate with is milled to their specifications, and made right here in the USA. They chose this material for its finish, superior strength and longevity. Like all Noble products, their shelters have a galvanized finish for unequaled rust protection.

Noble Shelters with solid walls are fabricated to accept your 3/4” plywood (wood is not included). A unique plywood mounting tab is used to secure each piece of wood in place. The plywood is cut to size (as per cut diagram) and is mounted against steel mounting tabs with a T-Nut and Machine Screw supplied in each installation kit. This design allows each sheet of wood to be recessed inside the wall panel. There are no exposed edges or corners of wood for livestock to chew or crib on.

When installed, each piece of wood will have a small air gap around its perimeter (approximately 1/8” to 1/4”). These perimeter openings offer solutions to commonly asked questions regarding lighting and ventilation: First, animals are more likely to enter a shelter when there is some visible lighting, ie. not a dark hole or box. Second, health issues arise when livestock are contained in poorly ventilated areas. Body heat and moisture can create health problems for different animals where there is little
ventilation.

Noble Shelters are quick and easy to erect. Jean Sells Noble supplies everything but the wood!

Each shelter comes with a set of easy-to-read instructions and all the hardware needed to assemble. For the solid wall shelters that require you to add your own wood, you’ll also receive a set of plywood cut diagrams.

Shelter walls are assembled with Noble’s proven clamp system, only requiring a 9/16” wrench anchor to assemble your shelter.

Noble recommends the shelters be anchored with their concrete anchor kit. Anchors are included with your purchase and you’ll receive an instruction sheet for them.

Noble Shelters are expandable. With their modular design, you may attach an additional shelter to existing ones, or you can change the design or layout of a previously-erected shelter. ANY wall can be made to be solid (wood ready), railed (5 or 6 rail panel/gate), or full open for walk-through.